nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

VRoIT Firmware is not found on support site, are you planning to stop developing IOT

abilashpr

VRoIT Firmware is not available from the support site, tried to search if there is announcement on portal for its disappearance but didn't find any. I am in middle of deployment and not able to find it on the support site. Are there any plans to stop developing IOT ?

Michael Brado please help!!!

Find more posts tagged with

Accepted answers

All comments

klaus_heidelber

Hi Abi,

You still can find it here https://support.ruckuswireless.com/software/2448-ruckus-iot-1-5-mr1-sz-software-release-ova-vsz-e-vsz-h-install-image
Actually it was hard to find which may imply little attention momentarily...

unknown

Hi Abi,

The RIoT firmware would be under "Ruckus IoT Module" in the downloads section.

https://support.ruckuswireless.com/software?filter=152#sort=relevancy&f:@commonproducts=[vRIoT]

abilashpr

Hi All,

Thank you, for the links these are all firmware for vsz and sz100. There should be one for Running vRIoT on work station and virtual box. The one that is mentioned in Ruckus Youtube channel (https://youtu.be/UAuc54saEko). I have used it in past but it's been removed without any announcement from support site.

Regards,

Abi

unknown

I believe they would have removed the redundancies of the releases as they were all the same install file anyway and just labelled them under the one link for each version number.

If you click in on one of the links e.g. Ruckus IoT 1.3 (GA) SZ Software Release (.ova) (vSZ-E, vSZ-H install image) these would include for a fresh install and it is an .ova file for virtual box. The .ximg files are for upgrading your vSZ\SmartZone to support IoT if you are running an older version of vSZ\SmartZone.

Ruckus IoT 1.3 (GA) SZ Software Release (.ova) (vSZ-E, vSZ-H install image)

Ruckus IoT 1.3 (GA) SZ Software Release (.ova) Virtual SmartZone.

VM Platforms: VMware ESXi 5.5+, VM Player 12+, Oracle VirtualBox v5.1.20+, Google Chrome v61+, Mozilla FireFox 56+, Safari: supported

Filename: vscg-3.6.1.2.13022.ova (for new/clean install)

What version are you after as well, I might have something lying around from a while back.

unknown

Actually you might be right on the money with that one. It does seem to be missing.

I just checked my files and I still have:

vriot-1.3.1.0.1.ova
vriot-1.4.0.0.17.ova
vriot-1.5.0.0.38.ova

Depending which one you might need I can upload it somewhere for you.

abilashpr

Hi Marvin,

The firmware required for vRIot, is not available on support site 3.6 and 5.1.1 are for vsz and sz100 respectively and I have been told if you have IoT module on the APs then you need to use these firmwares on you wireless controller, but it depends.

If you have vRIoT 1.3 image pls share it, it wouldn't be large one.

Regards,

Abi

abilashpr

Marvin,

Wow!!!! Pls share me 1.3 and 1.4 if you don't mind via drop box.

I hate 1.5 as it requires 5.2.

Thank you.

Regards,

Abi

unknown

GoogleDrive instead for more storage space 🙂

https://drive.google.com/drive/folders/16fqjANjokEy5l9TczLx-jCs2C2qO4ijZ

abilashpr

Hi Marvin,

Thanks a Ton!!!! you are awesome. I owe you one.

Regards,
Abi