nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

In the ssid I chose "none" to remove the password, but the ssid still has the password help me please

unknown

In the ssid I chose "none" to remove the password, but the ssid still has the password

help me please

Find more posts tagged with

Accepted answers

All comments

Ankush_Chandan

Hi Tu,

You login to this AP's CLI and check the encryption setting using following command to confirm if change is reflected:

get encryption wlan

example:

rkscli: get encryption wlan0


SSID             : Lab_WLAN

Net Security     : WPA

Protocol Version : WPA2

MAC Auth         : None

Authentication   : Open

Cipher Algorithm : AES-CCMP

WPA PassPhrase   : f0f49fe29ac1379c7ab4bc6cc18ff7e5ef9bade3a01a03bb11330ed30a9e0739

OK

If you have made the change and AP do not reflect it. Please open a new support case and we can have a look.

Regards,
-Ankush

sanjay_kumar

Hi Tu,

I hope the AP has taken the configuration after the changes made on the SSID.
Click on the AP >> Check for the Configuration Status >> It should should show as "Up-To-Date".

If it is in "New Configuration" then the AP has not taken the config changes.

unknown

thank you, I want to remove the password of the ssid Mgallery office
Image_ images_messages_5f91c48c135b77e247ae12e5_29edd4f20a8db34f8828122453bf9724_RackMultipart20200925616731ten-48011620-2204-47bc-a3fc-32169dea3e13-1923579676.jpg1600996936

Image_ images_messages_5f91c48c135b77e247ae12e5_29edd4f20a8db34f8828122453bf9724_RackMultipart20200925616731ten-48011620-2204-47bc-a3fc-32169dea3e13-1923579676.jpg1600996936

unknown

thank you, I want to remove the password of the ssid Mgallery office Image_ images_messages_5f91c48c135b77e247ae154e_07f68b4c9ae1be7ad3932a36485e2fee_RackMultipart20200925439714rcf-df6ea14b-0c19-4c4a-bdb3-c9d00b9fbc99-1112720212.jpg1600997274

Image_ images_messages_5f91c48c135b77e247ae154e_07f68b4c9ae1be7ad3932a36485e2fee_RackMultipart20200925439714rcf-df6ea14b-0c19-4c4a-bdb3-c9d00b9fbc99-1112720212.jpg1600997274

sanjay_kumar

Hi Tu,

Can you go to Access Points >> Click on the Access point >> Under General Tab >> Status Summary >> What do you see for the "Configuration Status"?

It should say as "Up-to-date".

Image_ images_messages_5f91c48c135b77e247ae178f_04eebf65e34432d7fb754842e60f08f5_RackMultipart20200925992096bmg-fe66ea79-f198-4e8e-9de6-ea9a0c3073c3-808366052.PNG1600998118

Image_ images_messages_5f91c48c135b77e247ae178f_04eebf65e34432d7fb754842e60f08f5_RackMultipart20200925992096bmg-fe66ea79-f198-4e8e-9de6-ea9a0c3073c3-808366052.PNG1600998118

unknown

Image_ images_messages_5f91c48c135b77e247ae1a15_226416e68c3128306e72873f45c4fe2d_RackMultipart2020092512703014q-9f02aa9b-3c1d-4e40-bce3-a9baedeed1a5-1707442813.jpg1600999546