BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
SmartZone and Virtual SmartZone
Dell E7470 laptop and R730 access point failure
philip_francis1
Hello, our Dell E7450 and E7470 laptops do not connect to our R730 access points which are controlled by Virtual Smartzone firmware 3.6.2. They do however connect to our older Ruckus wifi access points.
They are running AC wifi NICs. Has anyone else had the same problem or know what the fix would be ?
Thank you.
Laptop details:.
Dell E7450 and Dell E7470
Intel Dual Band Wireless-AC 7265
They are running the lastest possible driver (version: 19.10.13.1)
Find more posts tagged with
Accepted answers
All comments
syamantakomer
Hi Philip,
Login to the AP cli and execute following command to verify the current mode of the AP:
rkscli: get mode wifi1
wifi1 Mode: 11ahe
OK
The ahe mode shows that the AP is operational at ax rates. To change the current mode to AC, use following command:
rkscli: set mode wifi1 11ac
Verify the mode change using following CLI:
rkscli: get mode wifi1
wifi1 Mode: 11ac
OK
This will probably fix the issue.
Regards,
Syamantak Omer
martin_martin
Yes you can try what he wrote, that will set it to ac mode.
I can say that I am using the same laptop with a R730 and R750 and have no problems.
If your problems continue, please open a case with support.
regards
Martin
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone