blocking the wireless client

Question

Hi Guys,How to blocking the wireless client in only 1 acces point? the client should be able to connect to only 1 antenna from the antennas and be freely connected to other devices.Possible?ZoneDirector  ZD3025

syamantakomer · Answer

Hi Monica,Its an issue which you want to fix by applying ACL.I would not recommend it because devices connecting to far APs is called sticky client behaviour and it can be fixed by some tweaking on WLAN configuration.It is totally upto the client when it comes to choose which AP it should connect to. However, you can force clients to connect to their nearest AP by changing below configuration ZD.
Login to ZD GUI >> WLAN/Wireless LAN >> Advanced options >> BSS minrate >> Set it to 12 or 24 and check if client connects to nearest AP.

If ZD is on older version like 9.x then use ZD CLI to make the change.Here is the article explaining this feature.https://support.ruckuswireless.com/articles/000002692

Regards,
Syamantak Omer

sanjay_kumar · Answer

Hi, I believe what you are facing is a Sticky client issue, the client is connecting to the remote AP rather than the AP near to it.Below is the article explaining the issue with the resolution.https://support.ruckuswireless.com/articles/000002277

I would recommend you to open a support case so that our TAC engineer can check more on this and implement the best settings accordingly.

unknown · Answer

Thank you. There are 2 antennas in the hall, the user connects to the remote one. and it's slow. not far away from him,I want to keep close to what's close. the remote device does not accept the incoming requesti am not Monica 🙂