nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

vSCG Setup Wizard bootstrapping error.

unknown

When I finish the vSCG Setup Wizard I get a bootstrapping error. I tried factory defaulting and starting over but get the same thing. I'm using the steps in the Getting Started Guide. Anything I should check or do differently?

Find more posts tagged with

Accepted answers

All comments

unknown

Kind of odd, but I bet you are using the same admin and enable password. Try 2 different passwords.

unknown

I tried 2 different passwords and got the same result.

sid_sok

What Hypervisor and what version are you running?

Do you have the minimum required resources?

Min CPU: 2 core

Min Memory: 5 GB

Min HD space: 100 GB

unknown

ESXi 5.1 update 2

CPU: 2 sockets, 2 cores per socket

Memory: 8GB (memory usage is at 15 out of 32 GB )

HD: 200 GB thin provisioned

I've tried 1 interface and 3 interface.

One thing I've noticed is that the wizard spends a lot of time on the 'checking cluster name' step - don't know if this is normal or not. I'm using a simple cluster name of 'den'.

sid_sok

That looks about right.

I will work with the support tech to see what we can do. We have deployed the downloaded image quite a few times already and so far so good.

Try downloading a new image and redeploy from a fresh image. Don't pre-set any resources. All I did was have VM deploy from OVA file I downloaded and selected all the default settings, edit the NIC and remove two and powered on the system.

unknown

The support guys figured it out.

After the 'restart network' step, do not reload before going to Setup Wizard. The reload was causing the problem.

Thanks!

unknown

Hi gents,

How long should the system take during the bootstrapping process?

It is on 10% for the past 20 minutes

Please advise.. thanks

unknown

Still nothing, staying on bootstrap @ 10%

Did a factory reset, went through the steps again, without reloading system

Bootstrapping still at 10%

VMWare 5.5

vSCG...

Mem @ 4096MB

CPUs @ 4

HDD Provisioned @ 100GB - Thick Provisioned Lazy Zeroed

Any other ideas would help

Regards

unknown

Deleted the VM

Imported OVA, but changed to 200GB Thin provisioning instead

Setup the vSCG without restarting

Working!!!

unknown

Hi, I'm having the same problem and the bootstrapping still in 10%, so the 'restart network' is the problem?????

unknown

Hi, I'm having the same problem and the bootstrapping still in 10%, so the 'restart network' is the problem????? Image_ images_messages_5f91c416135b77e247956885_b326220f23e9197e76e696a47542a08f_image_inline-fe7447bf-42cd-441d-8e63-c39d65b2445c-468334748.png1407333283

Image_ images_messages_5f91c416135b77e247956885_b326220f23e9197e76e696a47542a08f_image_inline-fe7447bf-42cd-441d-8e63-c39d65b2445c-468334748.png1407333283

unknown

Hi Hugo,

No, the reload step is the problem....

Import the OVA

In the CLI do the setup and configure the network

restart network to continue

DO NOT reload the machine

Go to the web interface with the newly configured IP address, and continue the setup from there. Do not go back in the GUI setup, as going back may reconfigure the network and may perform a restart. Just continue the setup steps from Cluster Information

I hope it helps

unknown

okey thank you! I'm trying it right now! I will let you know

unknown

Hi Jonathan,

How long does it take for the bootstrapping part? I mean it have been almost 2 hours and still on 10%, is that normal?

sid_sok

Jonathan is correct, the issue is the "reload" scg command that is causing the issue. We updated the "Getting Started" guide to reflect this.

unknown

Hey Sid, how long usually takes for the bootstrapping phase to finish??

sid_sok

I have done this about 12 times for various test and it usually only takes a few minutes. If it goes on for more than 5 minutes, something went wrong.

Can you open a support ticket? if so I will go ahead and grab the case and will see what I can do to help.

Sid

unknown

Okey thank you!