Ap cli script

Question

I have created a script to execute on the vSz, but it is giving error

"Unable to upload the AP CLI script to the controller. Reason: com.ruckuswireless.wsg.domain.diagnostics.exception.InvalidAPCLIScriptFileException: Wrong AP script syntax."

my script is as follows
script
#define AP FW version ­­ this should match the AP version of that zone
fw_version=x.x.x.x   
#define Model class, at present we only support model=all  
model=all   
# Actual AP CLI command goes here, single line for single command  
set scg ip x.x.x.x
set scg config interval 300  
set scg status interval 300   
quit

martin_martin · Answer

Hi Ramesh,

This was just an example file I used.
The command itself disables IGMP on the wlan0 (for multicast traffic).

regards
Martin

unknown · Answer

Hi Martin,
Thank you for your reply.
can you please tell me what does this command will do "set qos wlan0 igmp disable"

Regards
Ramesh

martin_martin · Answer

Hi

As example
save the following as text file.
model should allways be all.

fw_version=3.1.1.0.349
model=all
set qos wlan0 igmp disable

regards
Martin