nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

R600 failure upgrade firmware on zd1200

unknown

Find more posts tagged with

Accepted answers

All comments

sanjay_kumar

Hi Laudir,

Is this a new AP which you are trying to connect to the ZD?
Or it is connected and unable to upgrade?
What is the software version on the ZD and the AP?
Is the AP and ZD on same location or remote location?

unknown

Good morning, the APs were connected during the update of the ZD1200, the current version of the ZD is 10.4.0.0 and before it was in version 9. After the update of the ZD the APs are only updating firmware all the time and the status is in red. Image_ images_messages_5f91c458135b77e247a35f5e_2729960a14c9ee2ce71225e28be06609_RackMultipart20200720126803gob-89181045-a8d5-43b6-9052-066a58fedf78-135320935.jpg1595238622

Image_ images_messages_5f91c458135b77e247a35f5e_2729960a14c9ee2ce71225e28be06609_RackMultipart20200720126803gob-89181045-a8d5-43b6-9052-066a58fedf78-135320935.jpg1595238622

sanjay_kumar

Hi Laudir,

What was the exact version of ZD before upgrading to 10.4?

Can you ping the AP's IP? If yes, try to login to the CLI and check the software version with the command "get version".

sanjay_kumar

Hi Laudir,

ZD should be in minimum 10.2 version if you want to upgrade to 10.4 release.
If the ZD is in 9.x or below 10.2 version, I believe the APs will not be able to upgrade to 10.4.

You might need to upgrade the APs manually.

Check out the below release notes for the supported upgrade path.
https://support.ruckuswireless.com/documents/3162-zonedirector-10-4-ga-release-notes/download

unknown

I don't remember what version were, when I try ping on APs IP doesn't work.