nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

VLAN SSID on one AP in Unleashed Network

unknown

I have a an Unleashed network setup with an SSID. I would like to add a second SSID on a separate VLAN but only have the SSID broadcast on one access point. I couldn't see where this can be done on the web interface so I'm not sure if this is possible.

Thanks,

Lee.

Find more posts tagged with

Accepted answers

All comments

unknown

You can use ap groups to accomplish this

Regards

Gideon

karthik

Hi,

In the main menu, click to expand "WiFi Networks" menu, to reveal existing SSIDs.
Click Create to add new SSID.
For VLAN assignment, click Advanced Options, and enter VLAN ID in Access VLAN.

HTH,
Thanks,
Karthik.

unknown

Hi Karthik,

Thanks for your reply. I do know how to create VLAN SSIDs. My question was can i have the specific SSID only broadcast on a specific access point.

Thanks,

Lee.

sanjay_kumar

Hi Lee,

Yes, we can do it. We just need to create a WLAN group >> Add the SSID to that group >> Then go the Access Points >> Select the AP and click on Edit >> Under the WLAN group select the Group which has the SSID you want to broadcast.

Below is the link where I have mentioned on how to create the SSIDs to be broadcasted on 2.4 and 5 GHz. This is on the AP group level, but we can do this for the individual AP with the same login.

https://forums.ruckuswireless.com/ruckuswireless/topics/adding-2-4ghz-to-existing-5ghz-network-for-r610

unknown

Hi Sanjay, Thanks for the info. I'm logged into the Unleashed master device and cant see where to create a WLAN Group or AP Group.

unknown

Hi Sunjay,

Thank you for you comment. Ive tried your instructions but when i connect to the master Unleashed AP CLI and enter those commands i get "The command is either unrecognized or incomplete."

If I connect to one of the member APs i get the following: "Command is not recognized: get wlan list"

I've looked at the CLI help and dont see 'get wlan' listed as a command.

Thank you

syamantakomer

Hi Lee,

How many APs you have in this Unleashed network?

If you login to Unleashed master, it is a controller CLI, not AP. Refer below command and follow the same what Sanjay advised you before.

enable
#ap-mode

Run the rest of the commands in 'ap-mode' and all commands should work.

Regards,
Syamantak Omer

karthik

Hi Lee,

From Unleashed version 200.7 we support AP groups.

For example
Install AP in Cafeteria
Create an SSID for Cafeteria
Create an AP group for eg. Cafeteria-Group, select Cafeteria APs, select Cafeteria SSID, and other settings. as needed.

Image_ images_messages_5f91c457135b77e247a32f19_d1aaa744c0f6a052523501f654cedc01_RackMultipart2020071540931x0dx-db382179-e235-4342-af86-247c0ed97a90-1916161653.png1594837427

Image_ images_messages_5f91c457135b77e247a32f19_d1aaa744c0f6a052523501f654cedc01_RackMultipart2020071540931x0dx-db382179-e235-4342-af86-247c0ed97a90-1916161653.png1594837427

References
https://www.youtube.com/watch?v=1eq6hUy8dM8
https://docs.ruckuswireless.com/unleashed/200.7/GUID-438F4C73-96B6-4294-A8AF-A8FFBCBDD96E.html

HTH
Thanks,
Karthik.