BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
Access Points - Indoor and Outdoor
zone flex 2942 keep hanging
unknown
After upgrade AP to latest firmware, AP not stable. After an hour, it will hang and uncontactable (ping test failed). Have to reboot again to resume wireless connection.
Find more posts tagged with
Accepted answers
All comments
unknown
Have you tried a hard reset? If yes, try again and hold the button down for 2 min and see if it helps.
Is the AP ZD controlled? Have you upgraded via ZD or by hand? To which FW have you upgraded?
unknown
hi, i tried but still the same. Now the device reset to default automatically.
Before that, the AP firmware version is 9.1 and i tried to upgrade via ZD (version 9.4)but configure in standalone mode. It seem not stable and i download from web portal and upgrade again from my local PC. It seem working fine for the first hour but after that, it become unstable and it happen like keep rebooting every 5-15mins.
Just checked the device and i can't ping at all (but LED show fast blinking). Hard reboot it and it back to default setting.
We got few units with us but all look the same. I guess it was due to software since all of them have similar issue.
keith_redfield
I've checked for similar cases, and not finding anything. If it were an issue with the software I'd expect to see dozens of similar cases.
Has anything else changed recently in your network?
Did you upgrade to 9.4.3 or some earlier version of 9.4?
unknown
hi keith, earlier version of 9.4.
Nope. We are trying to upgrade it and configure as standalone mode and transfer the unit to branch office
unknown
I found something. The software are using backup software version and all setting are set to default and that the reason, the wireless is off as no wlan enable in default setting.
Between, in what event that causing AP using backup software. Anyone know?
unknown
update:
Found that the AP hang when turn on wireless signal. Turn off wireless and always can ping to the AP.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
