R720 802.3bt support

Question

I have read conflicting information (datasheets) on whether or not R720 supports 802.3bt.  Can someone verify if R720 indeed supports 802.3bt?

unknown · Answer

Thanks for the reply.

Another issue to verify. 802.3bt comes either as Type 3 or 4, do I need to get type 4 since I've read that R720 only uses 2 twisted pairs for power and type 3 only supports 30W for two twisted pair while type 4 supports more?

Thanks again.

sanjay_kumar · Answer

Hi CVCCSI,Yes, that is correct. Use the below command if you want to set\check the power mode on the AP CLI.rkscli: set power-mode at+rkscli: get power-mode

unknown · Answer

So manually set POE to 802.3at+ on r720 will get me the 33.5w needed to run at full power with a 802.3bt POE switch?