nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Certificates with Unleashed

jens_1027613

Hi

I bought a certificate for use with a unleashed setup, but I cant really make it work.
I set a DNS-record for the master, but the master can change and it will then redirect to the ip-adresse of another AP.
How can we give the users a feeling of working on a feily secured network without certificate warnings etc?

Find more posts tagged with

Accepted answers

All comments

michael_brado

The soon to be released Unleashed 200.2 will use a single IP address for Management, known by all (Master/Standby/Member) APs.
This managment IP will be your DNS hostname address for a third party certificate.

jens_1027613

Do I dare to ask for an alobaration on the term "soon" ? 🙂

jens_1027613

Now we do have 200.0
But it still is a bad experience 😞
I can set up a management IP, but I will still get certificate warnings. I will just be redirected to the IP of the current master.
Also if I go to : https://wifi/guestpass I will get warnings and be redirected to https:///admin/login.jsp ... not the guestpass page.

unknown

hi jens, do you solved it ?

unknown

i have to roll back to 200.1 from 200.2 in order to make it working

unknown

Hi, we suffered same bug. There is fixed firmware which solved our problem, but code is not publicly available. Contact support and ask for firmware version 200.2.9.13.188. It's firmware which was developed after we opened support ticket roughly 2 months ago regarding this issue, you could tell support our case id as reference: 00497963.