Power TX power setting auto

unknown

Hi, I own a R310. I don't like the AP to have always use the max power setting, but I do like a good connection.


Will the auto tx power setting reduce the tx power when no data is downloaded, or will it constantly use the lowest tx power that is needed for a good connection? Is the ssid always transmitted with max power?



Please explain in detail what the auto tx setting does.



Thank you!

michael_brado

If you have only one R310 it will operate at maximum power.
If you manage your APs with a ZD or SZ controller, Radio Resource Management (RRM) can adjust power if your APs are too close together.