nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Zoneflex 7321 as standalone or unleashed

unknown

I am looking to buy some second hand ZoneFlex 7321 AP's, but my question is that you can use this as a standalone or unleashed AP, so without a ZoneDirector? Thanks!

Find more posts tagged with

Accepted answers

All comments

unknown

Hi Gilles,

This will work as a standalone. Unleashed will NOT work.

If you want some sort of Unleashed support I would recommend R500 as a minimum WAP. If the area of coverage is small, R310 would do just fine.

On a side note, this is a 2.4 GHz ONLY, N-radio WAP. Unless you collect vintage stuff, this is not a great WAP compared to what is available on market today.

Cheers,
Alex

DarrelRhodes

Hi Giles,

You can run the 7321 APs in a stand-alone mode using firmware 100.0.0.0.128. They don't support Unleashed as this OS was released after the 7321.

Perhaps consider the R500 platform if you think Unleashed would be a better fit for your deployment. Certainly if you have more than a handful of APs on the same site, then Unleashed will provide better performance and ease of management.

Thanks,
Darrel.

unknown

Thanks for both answers!

unknown

hello does anyone have a link to this firmware mentioned above?

hayward_kong

You mean the unleashed firmware for the r500?