Dual 7731 in Link Agg mode

Question

7731 Outdoor AP's in bridge mode. Is it possible to add a 2nd Pair and setup Link Agg/Trunking so we have 2 AP's on both roofs, to double the bandwidth?

Or will tis create a loop?

robert_krause_1 · Answer

This is not surprising. The load balancing is done for end to end pairs, typically based on MAC addresses. When you measure between two machines, only one link will be used. Measure between a different pair of machines at the same time and you should see both getting the full bandwith of one link.

If you want to double the bandwith for a single communication pair, it gets much more complicated. You would need high speed routers on both ends to do packet based load balancing.

unknown · Answer

I tried. One pair will in disable mode but failover is working if the active link is down. I test with peer to peer bandwidth test but the result showed the bandwidth not double up.

unknown · Answer

Thanks for the info, but i changed my design, so i don't need this setup.