Dear All Expert,
May I know for Ruckus R510 can configure in standalone mode.
Hi goh_chee_wong,
The following article explains how to convert an AP into Unleashed(Standalone mode)
https://support.ruckuswireless.com/articles/000005720
The following link is the firmware required to flash the Access point to standalone mode
https://support.ruckuswireless.com/software/2713-ruckus-unleashed-ap-200-9-10-4-212-ga-refresh1-software-for-r510
Here is the User Guide how to configure Unleashed(standalone mode).
https://support.ruckuswireless.com/documents/3437-ruckus-unleashed-200-9-ga-user-guide
Best regards,
Yes. R510 if running AP1xx series firmware eg. 114, 110, 108 it can work as standalone with individual CLI and HTTP/S GUI access methods. However, it is intended to be used as intermediate firmware for discovering ZoneDirector or SmartZone controller, or Cloud.
I would suggest you look at the AP firmware 200.x series. This firmware can run an AP as a standalone or cluster of APs. Also provides more features for a standalone AP such as AVC, mobile app, URL filtering, Alexa skills etc.,
You just need a 200.x version of the ap
