nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

unknown

How do I set the client to a maximum of 250 clients? I have set the menu priority but the client can only reach 100 clients in the original?

Find more posts tagged with

Accepted answers

All comments

veno77

What controller are you using? Unleashed?

unknown

yeah unleashed

veno77

Go To AP Group config - Other, find the AP model and set the desired max clients, be careful not to exceed the limit supported by the AP itself. Click Finish.
Image_ images_messages_5f91c44f135b77e247a163ba_c95e910161ff6df62050e6f8f1879026_RackMultipart2019072260017pwig-5f048fe6-79b9-45e1-8fff-27281a20fe1d-1506362349.PNG1563778837

Image_ images_messages_5f91c44f135b77e247a163ba_c95e910161ff6df62050e6f8f1879026_RackMultipart2019072260017pwig-5f048fe6-79b9-45e1-8fff-27281a20fe1d-1506362349.PNG1563778837

unknown

already done but still stuck in 100 clients

((

veno77

In this case, if you have valid support contract open a TAC case with the support.

JacksonCampbell

I'm having this same issue. Updated all the max clients to 200, but it still says 100 under each AP.

Amith

Hi @JacksonCampbell,

Please let me know if the AP is connected to the Zone Director or the SZ/vSZ.

On the ZoneDirector, we have the option to configure the MAX-allowed clients option under the Model Specific Config.

Login to the ZD GUI.

Navigate to Configure ==> Access Points.

Under the Access Points group click on the Edit for the specific AP group. Below you can increase the Max clients associated with the AP.

Max Clients: Allow Maxclients to associate with this AP

We do not have an option from AP groups on the vSZ similar to ZD, a Feature Request is already in place.

You can find the same in the below article:

https://support.ruckuswireless.com/articles/000011255

Thank you!
Amith

JacksonCampbell

It's on Unleashed. Regardless, as I said, I configured the WLAN to allow 200 clients/radio and I set the APs to be 200 clients/AP, but the AP info still says max clients 100, so there is a bug in Unleashed. Also, the CLI refuses to go into WLAN config mode, so there seems to be a bug there too.