nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

how to access the zonedirector 1200 GUI?

unknown

I can not access the interface of my zonedirector, please how?

Find more posts tagged with

Accepted answers

All comments

unknown

Hi default ip of ZD is 192.168.0.2 try this.

I am available in Abidjan for further support to 47575251

unknown

thank you, I will try if there is a problem I call you

unknown

Sans soucis mon frere

unknown

Salut Mon gars ,j'espere que tout VA been en Abidjan.

Have question for you if you can help.

I have zf7982 and want to add R600 unleashed as main AP on main floor then move zf7982 standalone in my basement no controller.

Is it possible ?

Any tips to make this easier?

unknown

So, basic TCP/IP troubleshooting would be great, and that you provide those details.
Does the IP ping?Are you on the right subnet?
What IP or you trying?Is there a DHCP server on the net, so it might have taken an IP from there?
If so, did you test the subnet for possible leases?
Just stating 'I can not connect..' in a forum like this, is, sorry to say, kind of a waste of peoples time.Be informative, and you will get top-level help.

unknown

I reset but I can not access the interface by 192.168.0.2

unknown

what is the status LED saying ??what is the power LED saying??please make sure when you reset the ZD while it is powered on... make sure it is not connected to LAN...when you try to access the device on default IP, make sure your LAN card on laptop/desktop is in the same IP range?

unknown

Does it ping?