how should a Ruckus T310c be mounted?

Question

i haven't been able to locate any documentation which describes how to mount the T310c.

parallel to ground or perpendicular> and recommend height from ground might be helpful as well.

tony_heung · Answer

You are welcome.  I believe it will be updated by our tech pub team.

unknown · Answer

Tony Heung
The Knowledge Base article with radiation patterns is a great resource, Thank you very much for sharing the link!
Will the article be augmented with 11ax/Wi-Fi 6 AP patterns? At the moment only R750 is there.

DarrelRhodes · Answer

Hi Robert,As stated in the QSG the standard mounting recommendation is for the T310c/d (omni) AP to be mounted horizontally 'dome down' (parallel to the ground).  However; as BeamFlex+ has vertically and horizintally polarised antennas; it is also possible to install the AP vertically, IF this suits the deployment type, as it will not give equivalent coverage to a horizontal deployment.There is no specified recommended height for installation, as this is dependent on the use-case in your deployment. The distance to the client devices you are connecting is the primary consideration factor.HTH.Regards,Darrel.