BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
ZoneDirector
Cisco Trunking with ZD3100/ZF7363
unknown
I am having some trouble with VLANs across 2 SSIDs. I have a corporate SSID, on VLAN 25. I need a guest SSID on VLAN 6. My Cisco 4510 port configs are:
interface GigabitEthernet8/47
description Wi-fi Test Port
switchport trunk encapsulation dot1q
switchport trunk native vlan 25
switchport mode trunk
end
interface GigabitEthernet8/48
description ZoneDirector
switchport trunk encapsulation dot1q
switchport trunk native vlan 25
switchport mode trunk
end
I'm getting traffic in VLAN 25, and on the correct SSID just fine. However, I cannot seem to get any traffic (even DHCP) across VLAN 6. The A.P. shows up in the ZD3100 just fine as well. The only odd thing is that the tag for access on the ZD and on the A.P. for the VLAN 25 subnet is showing as VLAN 1.
Thoughts?
Find more posts tagged with
Accepted answers
All comments
rahul_koul
Hi Bryan,
I believe Cisco switches by default allow all VLANs on a Trunk port so you don't have to explicitly allow/tag the allowed VLANs on the Trunk Port? I mean VLAN 6 btw for which the clients are not even getting the DHCP address. Please clarify.
Also, did you add a tag for the Guest SSID on ZD WebUI, Configure :: WLANs :: ACCESS VLAN ?
unknown
I believe you are correct on the Cisco handling of VLANs.
And I did add the tag for VLAN 6 to the configuration of the guest WLAN under:
Configure::WLANS::(wlan name).
ACCESS VLAN :: VLAN ID :: 6
I can connect a client device, but it does not get a DHCP address. I have the helper addresses set up, the scope is built, but I don't even get to the captive portal login for GuessPass entry.
unknown
I have now made the problem worse.
I removed:
switchport trunk native vlan 25
from both the A.P. interface as well as the ZD interface.
I also changed the ACCESS VLAN for the ZD and the corporate WLAN from "1" to "25". While this allows me back in to the ZD, my WLAN is now exhibiting the same behavior as the guest WLAN....
rahul_koul
Bryan,
This might end up taking a long time here so I would suggest opening a case with Ruckus TAC and I will take the ownership of this case as I know what's happening. We will need you to have a valid technical support contract on your ZD. Awaiting your response.
unknown
It allowed me to open case 00121180 . I hope that means we have support on that. I can't find my records.
rahul_koul
I have taken its ownership. Will check the support entitlements and get back to you shortly. I work 9-6 PST.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
