nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

display APs state with little colored buttons

unknown

It will be good if in zonedirector GUI: monitor>access points tab has a "colored" status of access point discovery states.

when i have to manage about 70 APs from ZD , to monitor access point discovery process should read states all of theese APs. it will be good if ruckus adds a little colored button near each AP , which shows the APs state in different colors.

Find more posts tagged with

Accepted answers

All comments

unknown

+1

Some status colorization would be beneficial in most Monitor dialogs.

unknown

Rather than adding a new icon how about changing colour of existing one?

Would suggest the 5th "network connectivity" turning red instead of green. [excuse my shoddy crayon colouring!]

Better add it's been a while since I had to discover an AP so possible these icons don't appear.

Image_ images_messages_5f91c419135b77e247963b88_18914b86e988b222e5c1690598a21fdc_accessdiscovery_inline-44357b03-a08d-4f4d-bb61-f1f012ad71cb-1650646119.jpg1394790094

Image_ images_messages_5f91c419135b77e247963b88_18914b86e988b222e5c1690598a21fdc_accessdiscovery_inline-44357b03-a08d-4f4d-bb61-f1f012ad71cb-1650646119.jpg1394790094

unknown

thats can be also an option 🙂 just add colored visual notification on AP state column

jelle_alten_606

What discovery states would you like to see? Do you mean things like:

- discovery mode

- not approved yet

- provisioning

- firmware upgrading

- configuring

- rebooting because of mesh change

Or do you mean something else?

unknown

hello,

will be good to see following states in different colors:

1)connected

2)provisioning(can be same color as firmware upgrading state)

3)disconnected

that's all 🙂

jelle_alten_606

Sounds reasonable. Provisioning/firmware upgrading state might be difficult, because the AP might be rebooting to make the changes, and at that point the ZD doesn't know if it is rebooting or if it is turned off.

I am developing an iOS app to show the state of our APs. This app actually shows disconnected APs in grey, and APs that need approval in yellow. That helps us a lot. And the user can choose not to see disconnected APs.

If you are interested, you can get a test version of this iPhone/iPad app.

Here is a sample screenshot:

Image_ images_messages_5f91c419135b77e2479647da_2ade8cb79d70a098d5d0648446aca58d_zdviewer_inline-59577027-574b-4b3b-b842-45fcfc7a4e67-1939229910.png1394816047

Image_ images_messages_5f91c419135b77e2479647da_2ade8cb79d70a098d5d0648446aca58d_zdviewer_inline-59577027-574b-4b3b-b842-45fcfc7a4e67-1939229910.png1394816047

unknown

great work....

i was thinking about something like that in zonedirector 🙂

for the first time at least colored "connected " and "disconnected" states can be very usefull.

jelle_alten_606

Thanks.

Yes, visual status would be very useful. In the ZD web interface I always press the "status" column header to sort by status. That helps a little.

I hope you know you can all columns, it is quite useful.

I also tried to enter "Connected" in the search field to filter the list, but felt quite silly after doing that. 😉 Combining that filter with sorting by status is not so silly though.