Disable 2.4 on single SSID

Question

I feel like this should be easier, and something in the WLAN config, but I'm not seeing it.

On one SSID I need to completely disable the 2.4GHz band. I already have a WLAN group called "no 2.4" that I use to reduce the number of APs running 2.4GHz to avoid overlap (it's a dense deployment). That works fine to fully disable the band. I just add an AP to that group, and the override in that group simply disables the 2.4 radio.

How do I now globally disable 2.4 JUST FOR ONE SSID?

This is a setup using a ZD-1200 on 10.2.

unknown · Answer

Kind of a mess because I have other groupings going on here, but in the WLAN config, I have two groups of interest, the "Default" group and the "Fuze no 2.4" group. "Fuze" is the SSID where I do not want 2.4 enabled. "Default" includes the SSID where I want 2.4 disabled, and "Fuze no 2.4" does not include the Fuze SSID:
There's not much to set in these groups, just really a list of WLANs.In the "APs" section, that's where we do things and since I already have a general "no 2.4GHz at all" group which has some APs in it to avoid overlap and such, these two groups are the only real configs of interest here:
Every AP (ignore my "guest group") is in either in the "disable 2.4GHz" group, so it wasn't enabled for the Fuze SSID in the first place, and the "Fuze Disable 2.4GHz" group contains the rest of the APs. In the config for the "Fuze Disable 2.4GHz" AP group, I have the "Fuze no 2.4" WLAN group selected, so those APs only have the SSIDs in the "Fuze no 2.4" group enabled.

Make sense? It's kind of backwards. This whole system is kind of a pain and not very intuitive.

unknown · Answer

I need to screenshot everything and reply back, but basically what I had was close, but doing the opposite of what I wanted. Circling back to the thread when I've got some breathing room. 🙂

unknown · Answer

Hi Bway Noc! Was my answer helpful?