BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
Access Points - Indoor and Outdoor
combine different APs version in same environments
unknown
dears,
Can i combine WW (World Wide) version APs with US APs in same environments
Find more posts tagged with
Accepted answers
All comments
albert_pierson
Hi Bandar,
US AP's can only be used with controllers set for US country code. They are locked to just US approved frequencies and power levels.
WW AP's can be used with any country code setting, including US. They are not locked to a fixed set of channels. So you should be able to use WW AP's in a system set for US country code.
But using WW AP's in the USA is forbidden by the FCC.
I hope this answers your question.
Thanks
Albert
unknown
But asuming you're outside the US, if you set a zone's country code to US, you are able to connect both WW and US aps. Please correct me if im wrong Albert.
albert_pierson
Yes, WW AP's can join US designated Zones.
The country code test is done when the AP tries to join the controller. US AP's will not be able to join zones set for any other country code, but WW can join US designated zones. US coded AP's have an internal configuration designating them as Fixed Country Code. This configuration is done when the AP is manufactured and cannot be changed by customers.
unknown
Thank you all.
Yes i’m outside The US but i have us product.
And someone donated WW version.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone