BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
Access Points - Indoor and Outdoor
Clients getting frequently disconnected on 2.4GHZ Radio while its is running smoothly on 5GHZ in same network
unknown
Clients are getting frequently disconnected on 2.4GHZ Radio from R500 while its is running smoothly on 5GHZ in same network.Connected devices would disconnect frequently and new devices hardly get to connect.But no issue in 5GHZ.Any idea on what the issue could be?Also in some old devices with b/g it seems fine.Is there any way to disable n mode in vSZ for 2.4GHZ Radio?
Find more posts tagged with
Accepted answers
All comments
martin_martin
Hi Raju,Your 2.4 Ghz might be a bit full.But first lets start with the software version running on the controller and on the R500.RegardsMartin
unknown
The controller is vSZ running 3.4.0.0.976,thanks
unknown
Do you have ChannelFly enabled on 2.4Ghz? If so that could be the culprit
unknown
Nope,Its on background scanning.I have disabled band balancing too but no help
unknown
I verified everything that could have gone wrong.One thing I did before this is upgrade the vSZ to 3.4.0.0.976 from 3.2.1.0 .Is there any such known bugs with this version?
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
