BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
Resources
Community and Online Support Services
ZoneFlex 2982 home use, connection issues
unknown
I was recently given a 7982 for home use from our schools technical supplier. Upon configuring it for use, I cannot seem to get a device to stay connected to it. I come from the instructional side of technology, and I'm very ignorant when it comes to the technical side. Any insights on how they should be configured?
Firmware version is 9.6.1.0.15
I originally thought my cable modem might be the issue, so I went ahead and placed it. However, that seems to be working fine .
Find more posts tagged with
Accepted answers
All comments
unknown
I think problem is in cable modem.
You need to reboot cable modem every time you change device attached to modem.
Problem is when modem recognise device attached to him, he remember his MAC adress.
When you do reboot, he will remember next device attached
Tell me if this solve your problem
unknown
Unfortunately, this did not solve the problem. I verified with the ISP that the modem is running correctly. I restarted everything. It seems now that the computer can connect to the access point at 2.4, but will not connect to the Internet. When I hardwire from the modem to the computer, it works fine
unknown
quick questions:
Is IP being given by Ruckus or cable modem or its set manually? Ruckus by default does not give IP and has to be configured exclusively to do so if needed.
when you said "computer can connect to the access point at 2.4, but will not connect to the Internet" - did you check if you got the right IP series and DNS ?
martin_martin
Is you cable modem in bridge or router mode ? does it give a private address like 10.x.x.x or 192.168.x.x or 172.16.x.x ?regardsmartin
unknown
I apologize, I'm not sure how to determine this. To access the user interface for fourth the modem, it is a 192.168.100 address
unknown
Hi Monnat , not sure if my reply to Martin below answers your question. From the user interface on the Aris modem, I'm not finding an IP address. However, to access the user interface, I use a 192 address. Is there way for me to tell this from the router?
To be more specific about the current issue, I have some devices that will connect to the router (kindle fire stick, iPad) but not access the Internet. A couple of other devices, such as my iPhone 7 and windows laptop, connect to the router and Internet fine. On the ruckuseand, I have set a static channel for both the 2.4 and 5.0 access points. Channel 9 for 2.4, and I believe channel 36 for the 5.0.
Again, I apologize for my ignorance! I appreciate everyone's help.
unknown
Upgraded the firmware for the router in hopes that would fix it, it did not. Current firmware is 100.1.0.0.432
unknown
What am i sure about is that your modem gives only one public ip adress, not private.
easiest solution, if you have any router, wifi router, attach cable modem in wan port, and any lan port into ruckus. That will solve your problem
If you doesnt have any router, you will need to set local subnet(s), and virtual lan, in addition to set dhcp that will give your devices local ip, not public (that is problem with your setup).
Maybe you'll need to set proper port setup (i am not very skilled in that area)
unknown
What am i sure about is that your modem gives only one public ip adress, not private.
easiest solution, if you have any router, wifi router, attach cable modem in wan port, and any lan port into ruckus. That will solve your problem
If you doesnt have any router, you will need to set local subnet(s), and virtual lan, in addition to set dhcp that will give your devices local ip, not public (that is problem with your setup).
Maybe you'll need to set proper port setup (i am not very skilled in that area)
unknown
Bogdan, I am confused by what you're suggesting. Sorry. Below are pictures of the current configuration. I have been taking the yellow ethernet cord out of the modem and putting it into the laptop to access the user interface for the router. Something simple I missing?
Current configuration is :
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone