MediaFlex 7811 / 7111, Antenna LED blinks?

Question

Hello Forum!

I own a pair of Mediaflex 7811/7111 devices -- still working great!; I have recently noticed that both the AP and the slave, at different points in time, had the 3rd LED (the "antenna" LED) blinking green, one blink every 2 seconds approx. Normally they're solid.

Connectivity didn't seem to be affected by this, but I wonder what that means. I have tried finding and searching user manuals online, but all I found was some reference to "solid or blinking green led -- ok". However, there must be a difference between solid and blinking.

Any ideas? Is connectivity getting poorer and this is some kind of warning?

Thanks!

--
JG.

unknown · Answer

Hi Michael,

Thanks -- does this mean then that there is really no difference between a solid and a blinking green LED for Wireless Device Association?

--
JG.

michael_brado · Answer

The Wireless Device Association LED, whether solid or sometimes blinking, Amber = no clients, Green = clients.

unknown · Answer

Hello Michael,

Thanks for the response.

However, what I'm noticing is that the 3rd LED (Wireless device association - depicted in the 7811/7111 as an antenna), is sometimes blinking green. This case is not described in the documentation you pasted above.

So any idea as to what a blinking green Antenna LED might mean? As I said, connectivity didn't seem to be affected both times I saw a blinking green Antenna LED; once on the 7111, and a few days later on the 7811. But it makes me wonder as to what sort of warning the devices are trying to tell with that.

By the way, my 7811 never shows an amber LED on the Wireless Device Association light. It's either off (slave is not connected) or solid green (slave is connected to the AP). So maybe this documentation is for a newer revision of the 7811/7111?

Many thanks,

--
JG.