I am an original Lennar Homeowner. My Ruckus switch has completely lost power (no lights turning on) and attempts to reset have been unsuccessful, so I need to initiate an RMA replacement. Please let me know next steps.
Hi
Greetings!!!
Thank you for reaching out to the RUCKUS Lennar Home Community.
I hope this message finds you well.
We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.
To proceed, we kindly request that you follow the steps outlined below:
1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.
2. Capture both pictures and a video of the switch, focusing on the following:
- The status of the lights on the switch.
- The cord connected to the switch.
- The switch plugged into a working power outlet.
Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:
Kindly shoot a video similar to the EXAMPLE Video provided in the link.
In the video, please ensure to capture the following:
1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.
2. Simultaneously, display the light status on the switch.
https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing
We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:
Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.
Thank you for your cooperation, patience, and understanding.
Best regards,
RUCKUS | Lennar Home Community Support
Hello
Here is link to uploaded video: https://drive.google.com/file/d/1WDfZNfmvOE0eip0ap7IhnlSgyjwFxWWm/view?usp=share_link And below are the pictures. Please let me know if you need anything else. Thank you
Hi @wjf,
Thank you for sharing the requested information.
Based on the troubleshooting performed, your ICX-7150-C12P Switch is not responding properly, and the Software Recovery process has been unsuccessful. A hard reset was also attempted; however, the issue still persists.
As a result, this Switch unit appears to be defective and needs to be replaced through the RMA (Return Merchandise Authorization) process.
To initiate the replacement, Please use the private chat option to respond so we can proceed further. For your reference, I have included a screenshot below.
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Hi @wjf
I hope that you are doing well today. Reviewing the RMA ticket, I noticed that the replacement unit was received already. Feel free to reach out if you have any questions. Thank you.
Greetings!
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
If we do not receive a response from you within 24 hours from the timestamp of this message, we will proceed to mark your post as inactive.
Thank you.
Yes have received unit. It did not include the return mailing label, but I was able to obtain one from customer service via email.
Thank you for the update!
Installing the new unit is just placing the cables in the same way as they were on the defective switch. You may take a picture of the old switch wiring or refer to this guide.
https://community.ruckuswireless.com/kb/articles/12-ruckus-lennar-home-devices-connectivity-setup-and-configuration-guidelines?utm_source=community-search&utm_medium=organic-search&utm_term=router
If you have any additional questions please let us know.