Hi @Kmmw113
Greetings!!!
Thank you for reaching out to the RUCKUS Lennar Home Community.
We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.
Based on the information provided, it appears that your RUCKUS devices are not powering on.
We apologize for any inconvenience this has caused and are committed to assisting you promptly.
To better assist you, could you please provide the following information:
1. Can you confirm if your RUCKUS setup was previously operational, and if there were any power outages before the issue began?2. When your switch is connected to the outlet, do you observe any illuminated lights (amber or green)? Kindly describe which lights are visible. Additionally, please provide a photo showing the status of the lights and the full switch panel with cable connections to the switch ports.
Please log into your RUCKUS Account before uploading these photos/screenshots.
Please help me with the requested queries and should you have any further questions or concerns, feel free to reach out.
We appreciate your cooperation and look forward to resolving this matter for you promptly.
Best regards,Imran SanadiRUCKUS | Lennar Home Community Support
Hi @Teamjoseph1991
Thank you for contacting RUCKUS Lennar Home Community.
Hope you are doing well
As this case is raised by @Kmmw113
To avoid confusion with posts, you can create your own post with the problem you're facing and a detailed description of the network issue and what you've done so that we can guide you properly. Please raise a new post with the above description on RUCKUS Lennar Support
Thank you again for your understanding.
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
Thank you.
Thank you for the response and the information.
To assist you further with required steps, please provide a photo showing the status of the lights and the full switch panel with cable connections to the switch ports. (Refer to the mentioned screenshot)
Please let me know if you have any queries in this regard.
Thank you again for your patience.
I kindly request an update on the status of the issue so that we may proceed further with resolving it. Pease share the requested information from my last post.
