RF setting in R650 Access Point

Pintu

Hi Team,

I would like to understand the recommended or standard RF configuration for a Ruckus wireless deployment.

My setup:

- AP Model: R650 (Unleashed / Dedicated Master)
- Environment: (Indoor hall / office / outdoor – specify yours)
- Area Size: (e.g., 3000 x 6000 ft)
- Client Density: (approx number of users, e.g., 5000 mixed devices)
- Use Case: (general internet / high-density event / VoIP / CCTV etc.)

Current concerns:

- (Example: interference, low throughput, roaming issues, channel overlap)

Questions:

1. What is the recommended channel width for 2.4 GHz and 5 GHz in high-density environments?
2. Should I use Auto channel or manual channel planning?
3. Recommended Tx power settings (Auto vs fixed)?
4. Best practices for enabling/disabling features like:
- Band Steering
- Airtime Fairness
- Background Scanning
5. Any recommended RF profiles for high-density deployments?

I would appreciate any best practices or real-world configurations.

Thanks in advance.

abilashpr

Dear Pintu,

Please try the following optimizations:

1. Set channelization to 20 MHz on both bands.
2. If you have a channel analyzer app, check the PHY speeds and MCS values to see whether they are satisfactory.
3. If there are no or few neighboring APs, set static non-overlapping channels (preferably non-adjacent ones). Otherwise, enable ChannelFly.
4. If there are more than three APs, minimize the use of the 2.4 GHz band.
5. Enable OFDM only.

Hope it helps.