Ruckus ICX 7150-C12P dead

Joyced

Hello Support Team,

I own a Ruckus ICX 7150-C12P and a WAP through Lennar. My switch is not powering on at all. When I plug it in, the amber light flashes briefly, then the unit shuts off completely, and no lights remain on. There have been no power outages in the area.

I’ve tried all standard troubleshooting steps, but the issue persists. Could you please advise on the steps to request an RMA replacement?

Thank you for your assistance.

pinky_ruckus

Hi @Joyced 

Greetings!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

From the case description, I understand that you are looking for the replacement of your Switch.

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

Please refer to the below pictures as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding. 

 

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.