nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Cannot connect to second and other SSID/WLANS

agent_halal

Hello, I have a ruckus ICX 7150-c12p, 2x R610, and 1x R510 APs. I have it configured on the router for 4 VLANs.
Vlan 1: Default Vlan
VLan 10: Family
Vlan 20: Guests
Vlan 30: HomeLab
Vlan 40: IoT

The network that works is on VLAN 1(i want it to be on Vlan 10). The other 2 network i have setup which are connected to vlan 20 and 40 respectively don't allow you to connect to them. How do I configure it to allow connection. Also any video or guides for a better configuration would be appriecaited. Thanks
imgur link(cannot find the image inset button)

Find more posts tagged with

Accepted answers

Mayank

Hi agent_halal,

Thank you for posting your query !!!

I understand that you have a Ruckus ICX7150-C12P switch acting as the router, and 3 APs (2× R610, 1× R510).

You’ve defined VLANs for different networks, but only VLAN 1 (default) works; VLAN 10 (Family), VLAN 20 (Guests), and VLAN 40 (IoT) aren’t passing traffic.

Below is the overview of basic setup :

On the AP side Each SSID must be mapped to a VLAN ID.And on the switch side The switch ports connecting to the APs must be trunk ports that carry VLAN 1, 10, 20, 30, 40.

The ICX (if running router code) must have a VE interface with an IP address in each VLAN.

Please refer to the below link for your reference :

https://ruckuswireless.my.salesforce.com/kA2500000000NUeCAM

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help further

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS if its addressed your query.

Thanks

Mayank

All comments

Mayank

Hi agent_halal,

Thank you for posting your query !!!

I understand that you have a Ruckus ICX7150-C12P switch acting as the router, and 3 APs (2× R610, 1× R510).

You’ve defined VLANs for different networks, but only VLAN 1 (default) works; VLAN 10 (Family), VLAN 20 (Guests), and VLAN 40 (IoT) aren’t passing traffic.

Below is the overview of basic setup :

On the AP side Each SSID must be mapped to a VLAN ID.And on the switch side The switch ports connecting to the APs must be trunk ports that carry VLAN 1, 10, 20, 30, 40.

The ICX (if running router code) must have a VE interface with an IP address in each VLAN.

Please refer to the below link for your reference :

https://ruckuswireless.my.salesforce.com/kA2500000000NUeCAM

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help further

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS if its addressed your query.

Thanks

Mayank

agent_halal

Yep I thought about it more and it seemed like i forgot to assign an interface to each VLAN. Thanks.

Mayank

No problem! I'm glad to help.