ICX 7150 stuck on boot mode after power outage

Question

Hello. My Ruckus ICX7150 is tick in boot mode after a recent power outage. I have tried the reset many times to no avail. The suggested software recovery steps are probably beyond my limited computer skills.

My question is are there businesses who provide the service of getting these switches back up? If so, does anyone know of a business in the Sacramento CA area? Thanks.

pinky_ruckus · Answer

Hi @Kona ,

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community

pinky_ruckus · Answer

Hello @Kona ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

pinky_ruckus · Answer

Hello @Kona ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.