APs across a router from ZD

Question

This must be really simple but I can't find it anywhere in the manual. We have an existing AP network hanging off a ZD1100, and the customer would now like to add another unit at a remote site, which is of course on the other side of some routers from the main building (we manage their outdoor network as well and latency shouldn't be a problem).

Am I best off introducing the new AP to the ZD first at Admin, then taking it to the remote site? Or is there a way of telling it the IP address of the ZD I want it to talk to - at this stage I don't know if the fairly small remote site has DHCP or I will need to program in the IP info manually to the AP.

unknown · Answer

Thanks Keith

I suspected I might need to go into the CLI and do something there, even though I haven't seen a list of available commands I have found some things on the 7731 we can do there that aren't available through the web menu. This should be exactly what I need.

keith_redfield · Answer

This article should help you out - https://support.ruckuswireless.com/an...

Basically this tells the AP which IP address to connect to vs using the normal discovery methods.