nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Unleashed Band Balancing tuning

unknown

I have two Unleashed R600's and all of my devices but two cameras have 5ghz radios in them but 90% of my devices are connecting to the 2.4ghz radios in the R600s. Even within 10 feet and clear line of sight my devices do not connect to 5ghz without me forcing the device to use 5ghz only. Any ideas?

Find more posts tagged with

Accepted answers

All comments

michael_brado

From KBA-2338: What is band balancing and how can I configure it,
the default number of clients on 2.4G must exceed 10, before *any* might get steered
(if they meet the other criteria to get balanced to 5G).

4. wlan-band-bal-minsta-thresh

Stores the value of max number of associated clients in an AP after
which the band balancing will try to distribute the clients among the
radios.

def is 10

https://support.ruckuswireless.com/answers/000002338

How many total clients do you have in your environment, and do you exceed 10+ on 2.4G of
either AP now?

mike_kuly

Besides the 10 client limit before balancing as Mike Brado stated you can set the load balancing via the "Extended Service" Tab. Click on "Radio control" and then select the band balancing tab. There you can set the percentage of clients that you want to force to the other band. Default is 25% but you can change that number all the way down to 1% to influence clients.

And that is the critical term, "influence". Clients determine which band they will join. We influence the clients to try another band by first ignoring the first few 2.4 radio requests. Most clients will then try the 5G band and we will let them in. If the client wants to only join a 2.4 band radio there is no way to stop it besides turning off the 2.4 radio.

I hope this helps.

john_d

Since these sound like statically positioned devices, it might help to use a 5GHZ-only SSID or something like that to force it to what you feel is the best AP/band.

But yeah, I've found that various internet-of-things type devices with low-cost wifi solutions to be the least tolerant of band steering, SmartRoam, and similar infrastructure-mediated techniques to coerce clients into making better decisions.

I didn't recall from my little time with Unleashed whether it currently supports ZD level flexibility for creating SSIDS on a particular band or on a particular AP.

michael_brado

Band specific (2.4 or 5G) SSIDs are not available in Unleashed (yet), but was the first reported Field Request submitted to Product Marketing.

john_d

Awesome! As probably one of the few home use customers, I'm super excited about Unleashed. It already shows a lot of promise and I'm looking forward to seeing future releases bring more feature parity with ZD! 🙂

unknown

Yeah this environment is my house, and I'm not going to exceed 10 devices on either radio. I turned the percentage of 2.4ghz clients down to 10%. I will try 1%. If I had the cli to work with I would try the other suggestions here. Looking forward to future software enhancements.

unknown

Still no solution for 2.4Ghz or 5 GHZ band per SSID! Please get it on a new firmware!