Ruckus 7982 PoE Problem

Question

I have 3 units of Ruckus Zoneflex 7982, but they dont work with the poe injector, only with the ac adapter, can you help me, please

michael_brado · Answer

Test powering the APs with a new/different cable, and from a PoE switch if you have one (and apart
from other devices if you can, to assure full PoE).

Ruckus PoE injectors should work.  And 7982s will power from standard 802.3af from most 
switches.  (test by not having them directly next to or above/below another PoE device, to 
get full switch capacitor output)  They should work in any port of 802.3at power switches.

If you determine you have bad PoE injectors, we'll swap them without having to ship APs.

unknown · Answer

Hi
i had some problems also with POE injector or switch, i used some HP pro curve
HP 2915-8g poe switch and i used to have the same problem because HP didn't respect the poe spec, 
Now i used cisco poe switch and no more problems,
You can try to start you AP with the ac adapter (and the poe cable insered )and when the ap is running unplugged the ac cord, i try this on a setup and it work.

unknown · Answer

if yours is NOT powering on Ruckus's own POE injector then would suggest RMA them..