nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

R700 firmware upgrade

Mpiatyko

Hi,

I have R700 with current Software Version: 10.2.1.0.129

I want to convert this R700 AP for use without zone director.

Please help me to choose right firmware for upgrade.

Thank you in advance.

Find more posts tagged with

Accepted answers

vasanth_edward

Hi @Mpiatyko,

Thank you for reaching out to Ruckus Technical Support via the Community Forum.

As I understand, you would like to use the R700 as a standalone access point. To proceed, please upgrade the device with the Solo firmware, which can be downloaded from the following link:
https/support.ruckuswireless.com/software/1728-zoneflex-solo-access-point-110-0-0-0-675-ga-software-release-r700

Should you need further assistance with the upgrade or configuration, feel free to contact us.

Regards,
Vasanth Edward
CCNA||CWNA

All comments

vasanth_edward

Hi @Mpiatyko,

Thank you for reaching out to Ruckus Technical Support via the Community Forum.

Should you need further assistance with the upgrade or configuration, feel free to contact us.

Regards,
Vasanth Edward
CCNA||CWNA

Mpiatyko

Hi @vasanth_edward,

Thank you so much. I have successfully upgraded my R700 to 110.0.0.0.675.

Moon72

@Mpiatyko wrote:
Hi,
I have R700 with current Software Version: 10.2.1.0.129
I want to convert this R700 AP for use without zone director.
Please help me to choose right firmware for upgrade.

Thank you in advance.

To convert your R700 AP for standalone use, upgrade to the ArubaOS 6.5.x or higher firmware version. Ensure compatibility with your device by checking release notes.