Since this release fixes CVE-2023-49225 could you please make these images downloadable without premium support?(you've previously indicated that solo releases shouldn't be premium)
Is there updated guidance for firewall ports to open, for ZoneDirector 10.5.1?
I did an upgrade to 10.5.1.0.124, and all of my APs (R600s, H510s, R650s) failed to upgrade.
I reverted to 10.5.0.0.212, turned on Secured AP Image Upgrade, and re-a...
I have a couple of cross-town WAN links which currently use an OpenVPN tunnel.
LAN <=> OpenVPN <==== 35ms ====> OpenVPN <=> R600
I get basically full wire speed from this setup (>200Mbps).
I'd like to replace the OpenVPN boxes with an LWAPP tunnel f...
If you still have the ZD1200 then you're better off factory resetting this (pressing the F/D button for 10-12 seconds). The ZoneDirector software is very similar to Unleashed, and the last ZoneDirector release (10.5.1) is more up-to-date than the lat...
What actions are you wanting to take, from what triggers? and what platform are you on (I'm assuming you have some system you want to integrate with Unleashed, but maybe you are trying to do everything inside Unleashed)?Assuming the builtin functiona...
There's a page which lets you enter your APs to see whether there's an Unleashed/ZoneDirector release which will support them all: https://indhradhanush.github.io/rksunlfw/You can see that the only way to get these running together is to buy a ZoneDi...
If the R720s are running 6.0.0.1.3209 then they have SmartZone firmware installed.You need to install solo firmware on these new APs, e.g. https://support.ruckuswireless.com/software/3876-ruckus-solo-access-point-118-2-0-0-875-release-r720, then they...
If your question is "can I wire my desktop computer into the mesh AP?" then the answer is yes.(You can't do any fancy port configuration for e.g. VLANs. For some reason, this is only available on the H series APs).