It is enough to add the additional port 1/1/37 like you did. "device(config-vlan-75)#tagged ethernet 1/1/37"In order to confirm if the port is added to the VLAN, you can use "Show running-config vlan 75"Hope that helps,Ravi Vatsavai
I believe the upgrade is to 8090 release. Beginning this release, ICX has a default username and password and has the SSH turned ON by default. The default credentials are super (for username) and sp-admin (for password) when you are trying to access...
Hi,If you have CLI access, then you can use 'erase starup-config' followed by a 'reload' command which will wipe out the configuration on the switch. Thanks,Ravi
ICX switches have a feature called protected ports. On the ports 1/1/47 and 1/1/48 , configure 'protected-port' under the interface level. That should get you going.. PVLAN on ICX switch is an alternative option. Ports 1/1/47 and 1/1/48 can be placed...
