CommScope RUCKUS Community Forums

namezys · 02-28-2024

Hello,I'm think about replacing r730 by r650.However, I realised that it does not look such much better as I expected.On my r730: 2x2-80MHz - 1200 MbpsTherefore I can expectant that 4x4-160MHz should give 4800 Mbps (double stream and double channelis...

namezys · 01-29-2024

Hello. Maybe my understanding of the DHCP relay feature is wrong but let me try to explain what I want to get.Current setup with general broadcast DHCPTwo SSID:"ssid-10" with VLAN 10"ssid-20" with VLAN 20Everything is connected through a switch to Mi...

namezys · 01-16-2024

Is it possible to put master and slave AP in different broadcast domain.I can make routing and IGMP policy for 2 different physical network but I can connect them directly.

namezys · 01-11-2024

I got two used T610 and want to install them in school there I have a small WiFi net on R710/R610.With the first one, there were not any issues: factory reset, login, flash unleashed firmwareHowever, I can't get access to the second one at all:it cre...

namezys · 01-04-2024

I'm helping to build a WiFi network in a school (using h320 / h510 / r510 / r610 / r710 / t310 / t610) in a pretty big area. All AP should be connected by 1Gb PoE ethernet (2 big switches with 10Gb uplink). All L3 features like routing should be proc...

namezys · 01-29-2024

Yep. I know that the main reason for a DHCP relay is to have a DHCP server in another broadcast domain.BTW, using the same technology AP can avoid broadcast traffic, can't it? I suppose that option 82 can be used instead of many DHCP servers.

namezys · 01-16-2024

Also I can use vlan tags if it can help.

namezys · 01-12-2024

Hi @syamantakomer It was run using a PoE injector with a direct connection to MacBook without any access to any network. Obviously, it was taken from a working environment and it was not able to reach a controller. Also, the factory reset worked bec...

namezys · 01-11-2024

@syamantakomer Yes. As I expected.In other words, if all wire connection works fine, mesh will not used.To be honest, I realised that with PoE switches it's useless for me as broken switch means no power for all AP.

namezys · 01-03-2024

Thank you. I was able to cross flash just by looking in google using keywords from your message.It solved a lot.

CommScope RUCKUS Community Forums

User Statistics

User Activity

ruckus r650 and VHT160

DHCP Relay - many SSID with different VLAN

Unleashed in different broadcast domain

Factory reset of t610

Mesh as a backup in Unleashed

Re: DHCP Relay - many SSID with different VLAN

Re: Unleashed in different broadcast domain

Re: Factory reset of t610

Re: Mesh as a backup in Unleashed

Re: Ruckus r730 Solo - Issue with 802.11ax