CommScope RUCKUS Community Forums

jay01 · 10-29-2023

Hi,I have an ICX edge switch connected to Core using 802.1w. I need to uplink another extreme switch to the existing ICX edge switch. Vlan 900 is configured on the extreme switch this vlan has configured with spanning-tree 802.1w and stp for point ...

jay01 · 11-02-2023

Hi Chandini,Thank for response. Yes the switch configuration I have has STP configured on vlans not sure of the reason but I only have worked with Cisco.Do you by chance have sample config of a Core switch with RSTP configured and one for Edge switc...

jay01 · 11-01-2023

Hi Chandini,What is the difference between configuring admin-pt2pt-mac on interface level compared with configuring under a vlan. Is that effectively like vlan pruning?Say for example the ports where in a lag and tagged to lag20 under vlan 100. Can...

jay01 · 10-31-2023

Hi Chandini,Thank you for configuration information.I understand what needs to be configured between Core and Edge switch but I am still unclear what the correct config is connecting Edge to Edge when daisy chaining switches using a lag or just an ac...

jay01 · 10-30-2023

Hi Chandini,Could you please help us with ICX switch model and firmware running on the switch ? ICX6450-48-HPOE/ICX64S08030h SW: Version 08.0.30hT311Also port 24 is it connected to uplink or end device ? Port 3/1/27 on ICX switch is up...

jay01 · 10-29-2023

Hi Ben,Whats the difference between configuring pt2pt stp configuration on interface as opposed to applying it on vlan instead? I am new to Ruckus switching and wanting to uplink to an extreme switch using RSTP. When I enable RSTP I am getting cons...

CommScope RUCKUS Community Forums

User Statistics

User Activity

BPDU Errors

Re: BPDU Errors

Re: BPDU Errors

Re: BPDU Errors

Re: BPDU Errors

Re: Configuring RSTP (802.1w) and Spanning Tree Best Practices on ICX Switches