CommScope RUCKUS Community Forums

Rayb · 03-17-2023

Hi,I have a Linksys EA6350 AC1200+ as Gateway Router & primary WiFi authenticator.I would like to use the R500 as WiFi Repeater (no cabled connection) to extend WiFi range, but I'm unable to figure out how through the Ruckus user interface or docume...

Rayb · 03-23-2023

UPDATE:I changed R500 IP to DHCP instead of static - same result, no connection to Gateway. Furthermore, the 2.4G SSID on R500 shows up as open (no password requested). WiFi device fails to connect to the R500 SSID with the "could not get IP" message...

Rayb · 03-19-2023

Hi,* Downgraded to 104.0 as suggested. The connection is cabled ethernet, and I was able to login to web UI (problem was Privoxy http proxy on Firefox).* I made the adjustments to Wireless8 (2.4G) & Wireless16 (5G). The web UI shows all radios are Di...

Rayb · 03-19-2023

Thanks for that solution @ms264556I flashed the Solo AP Firmware then changed the IP to Static 192.168.1.2 / 24 - strangely, the default user + pw combo does not work on the browser (https) login, but does work for the ssh login. I did a Reset, and I...

Rayb · 03-18-2023

Thank you for taking time to answer.For posterity: As you imply, the reverse setup (Ruckus as Gateway Router, Linksys or other device as Repeater / client) would most likely work, since those devices have client AP mode in the software.Thanks!

CommScope RUCKUS Community Forums

User Statistics

User Activity

R500-Unleashed: Configure as WiFi Repeater

Re: R500-Unleashed: Configure as WiFi Repeater

Re: R500-Unleashed: Configure as WiFi Repeater

Re: R500-Unleashed: Configure as WiFi Repeater

Re: R500-Unleashed: Configure as WiFi Repeater