Hi Ben,The morning surge in the DHCP failures could be related to student devices associating with low signal quality as they enter the premises. If there is a DHCP loadbalancer/backup server, the secondary server could be sending DHCP NAK.It may be...
I've had some issues in the past with SZ where I manually had to run script to tell APs to operate in at mode.Have you tried this?'help get' and 'help set' usually would list commands available.
I would run a dhcp server and also try IP addresses https://support.ruckuswireless.com/articles/000006019Usually Unleashed AP's UI load if you access https://<Leased_IP_ADDR>
For each mesh hops, you would expect to lose 50% of the traffic. Approx 30% of traffic after that over WiFi.The overall speed will depend on your RF environment as well. Depending on the controller you use, you will be able to test multi-hop speed. ...
