Hi @lienmonden Since controller is behind NAT, we have to configure Control NAT IP. Please get output of "show interface" from the controller CLI and "get scg" from AP CLI.
@cangqingse You can navigate to Network> Access Points> System> Event and search for event type "Client joined" or "Client disconnected". You can also search client mac address.You can enable "Historical Connection Failures" feature under the zone to...
@PastorLopez The AP will tag all the ingress traffic from clients with WLAN VLAN ID and forward it to br0/eth interface. The ethernet (uplink) port of the AP is by default configured as trunk port. So, you have to configure VLAN ID only on the WLAN p...
