Hi, every one I have a Ruckus ZD-1200 and 4 Ruckus AP R730. ZD has 10.5.1.0 build 199 firmware that supports AP 730. but still none of my AP joined ZD 1200. they can ping each other so there is no...
I am looking for pictures of the inside of the R750, I am curious as to what it looks like with the antenna elements. The only one that I came across is the one I’ll provide, but does anyone know for...
Dear ALL, OK! As you may found that, there are many similar topics here over these few years... so I would like to join asking the same issue... see whether Ruckus can have an official response or...
I have a bunch of Ruckus T710 and T610 access points that are currently running 5.2.2.0.2069 firmware that I'd like to upgrade to 6.1.1.0.1274 firmware so that they are aligned with our Data Plane. W...
I have 3 very old R500 APs in my home that were installed by previous home owner and were controlled by a zone director 1200. But I was not able to access the controller. I had to build a...
'lo, all. I'm new to Ruckus devices, so kindly forgive my ignorant questions. Our office has two active R510 APs running 200.15.6.12.304, with one as master. We also have two ZF7372 (104.0.0.0.1347)...
Recently bought two R770 AP for WiFi7. I have brought a vSZ-E on hyper-V . I could see R770 has came with solo firmware 122.0.0.0.722. Hence I don't think it will directly join a controller with 6.1...
Hello, I have a Zonedirector ZD3025 working fine with a lot AP in my infrastructure, a lot of AP r600 be discover automatically by this Zonedirector. i received two new AP 720, and they n...
Hi Guys maybe someone can help please, I am having issues with a new r770 out of the box. First of all the web interface is not enabled and I am having to enable it via command line with "set http e...