Dear Valued Customer, The RUCKUS One team will be adding a new outbound http connection, http://ocsp.godaddy.com on March 27th, 2024. If you do not currently whitelist the outbound connections from your premises, you will not be impacted. If you do, ...
Hello All, This is an important security announcement. CVE numberCVE-2023-49225SeverityMediumWorkaroundAvailableFixAvailable A vulnerability in the web-based management interface of the RUCKUS AP product line could allow anunauthenticated, remote att...
By using copper Ethernet cabling to provide DC power, Power over Ethernet (PoE) removes the requirement for distinct power supplies and sockets. It grants increased installation flexibility for Ethernet end devices, although it lacks Ethernet data ca...
Issue: Unit 3 status is showing as reserve state under the show stack output below:ICX7750-26Q Router# show stackT=1d17h49m48.5: alone: standalone, dynamic cfg, S: staticID Type Role Mac Address Pri ...
:: IP ADDRESS ASSIGNMENT IN 8200 DEVICES::In 8200, The Switching image was deprecated with 10.0 and each platform will only use one image starting with 10.0.ALL the L3 image support L2 features starting w...
Network Environment: vSZ-H version : 6.1.2.0.404Windows Server 2016Setup Procedure:This demo explains the configuration steps to authenticate wireless clients using 802.1x- SZ/vSZ by configuring NPs policy on a Windows server.1-Make sure if the belo...
As a Ruckus Technical Assistance Center (TAC) engineer, this knowledge article aims to provide guidance on assigning radio profiles to AP groups within the same venue in the RUCKUSOne platform. This specific tutorial addresses the scenario where a c...
Devices running different FastIron releases may encounter SSH connection issues due to differences in default key exchange and host key algorithms. For devices running FastIron release 09.0.10a to 09.0.10h, attempting to establish an SSH connection w...
Before proceeding with the following steps, please note that the example resets the username to "super" and the password to "sp-admin," which is the default for FastIron 09.0.00. Ensure to press Ctrl and Y before executing the steps below: You must a...
Issue:Trying to access ICX 7150 switch model through Web UI but getting an error “Server error. Will be fixed in few minutes”.Tried different browsers such as Edge, Chrome, Firefox, but same issue.Switch is up in Cloud Ruckus one and running version ...
When downgrading the switch from 9010 and above to 8095 “ve” related interface commands and L3 configuration would be removedIssue noticed:When the user chooses to downgrade from 9010 version and above to 8095 versions in ICX switches, they will noti...
