RUCKUS Wireless Questions and Best Practices

|

Wireless Questions and Best Practices

RUCKUS offers a number of Best Practice Guides for all aspects of Wi-Fi system design, installation, configuration, management and maintenance.

Forum Posts

Sorted by:

ASK the Pack

No mesh, no WDS, no repeater mode ZF7363

ZF7363 EOL device I understand that but it can't mesh on standalone, can't be a repeater, I have a Chinese £11 Can which has repeater mode and the signal is as good as ZF7363. I thought I will give Ruckus a try even thought it is an old device I woul...

AC+ not working with older devices - any other kind of secondary protocol I can add?

I'm part of an organization that uses Ruckus for our Wifi services. I do not know any of the exact specifics, because I am not part of the hardware team on our organization.We are using an AC+ protocol, and some of our older devices do not work corre...

Client Isolation Whitelist Chromecast with R500

Hello. I walked into a situation that has 4 Ruckus R500 access points. There are 2 SSID's being broadcast, both on VLAN1. One is a private network that has no restrictions other than WPA2 password, the other one has the additional 2 checkboxes set to...

R500 WiFi speed (2.4 and 5) seems limited to 100mbps despite FIOS Gigabit

Have read many posts and am convinced I have some type of configuration issue. All of my new devices (e.g., iPhone XS, Surface Pro 6) seem to top out at 100/100mbps. I don't use mesh, have 3 R500s and a ZD 1200 connected to Verizon FIOS Gigabit int...

Connect AP ( R510) to Virtual SmartZone - Essentials 3.6 using wireless only ( without cables conected to the network)

Connect APs ( R510) to Virtual SmartZone - Essentials 3.6 using wireless only ( without cables connected to the network) - I`m planning to use Mesh but I don`t wanna make pre setups using network cables. note: I`m not using unleash

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1