cancel
Showing results for 
Search instead for 
Did you mean: 

Zone director vs unleashed

amin_mohammed
New Contributor

Hi

I am running 7 ruckus r510 in my house on unleashed. I have a zone director 1200 lying idle with me. Is there any performance difference if the Aps are run on unleashed vs on zonedirector.  All aps are hardwired to a POE switch.

I am not liking the range of the r510. My clients mostly iPhone remain on the 5ghz channel and disconnect when far from the ap but don’t move to the 2.4ghz. I created a separate 2.4 ghz ssid but don’t see much range difference on that either.

Could range performance improve if running a ZD or deciding which channel to connect before disconnecting when moving out of range.

I hope I can get a reply from you or someone from ruckus. Thank you

1 REPLY 1

syamantakomer
Moderator
Moderator

Hi Amin,

I think this is duplicate of below query.

https://forums.ruckuswireless.com/conversations/ruckus-unleashed/unleashed-vs-zone-director/60ca5691...

Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI