01-22-2024 10:34 AM
Since I updated my unleashed set-up to 200.15.6.12.304 I cannot login any longer by any browser.
Configuration with issue:
- R750 as preferred master
- R350
- unleashed 200.15.6.12.304
Configuration without issue:
- HW same as above
- unleashed 200.14..... (and previous versions)
Issue
After login on the web interface, an empty grey screen is shown. No menus at all are visible
Reproduce issue
Browser is showing login page normally.
Password and login are getting accepted.
The "loading circle" is shown for a short time in the center of the screen with grey background
The grey background remains. Nothing further happens.
By pressing reload button on the browser, the "loading circle" shows up for a short time again. That's it.
Function wise unleashed is working as expected.
Tested configurations
- Edge on Windows 11
- Brave on Windows 11
- Firefox on Windows 11
- Firefox on Ubuntu 23.10
- Edge on Server 2022
- Chrome on Android
Login by Android unleased app is working.
Solved! Go to Solution.
02-22-2024 11:47 AM
05-09-2024 01:59 AM
Thank you. This solved my issue.
Same issue here. The web UI is looking for a remote management setting and fails as in my case it has never been set.
I enabled remote management through the mobile app settings and disabled it again. That fixed it for me.
01-23-2024 06:01 AM - edited 01-23-2024 06:10 AM
Same issue, R510
factory-reset -> upgrade to 200.15.6.12.304 -> initial wizard, reboot -> grey screen after login
01-31-2024 03:18 AM
Hi,
Have the same configuration. But it's new one. R750 AS PREFERRED MASTER. 19x R350.
Unleashed with R750 is up, add R350, have to upgrade 200.15.6.12.304. did it. After that, R350 is "disconnect" and didn't boot. Just always reboot.
Do you have stable unleashed system?
We suppose an issue with R350 Fw 200.15.
01-31-2024 05:42 AM
We had to downgrade to 200.14 and we could install all the system as we wanted (R750 master preffered, 200.14 and 19x R350)
That's shame, we can not use remote unleahed yet.
wait for a patch upgrade.
Guillaume
02-21-2024 10:33 AM
How did you downgrade? Any guides out there? Via SSH?