cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7125 cannot be logged in after a power outage

shawn_feng
New Contributor

I can't get to the CLI screen, I am prompted for a username and password, but I don't have one. auto approval is enabled.The system has been reset.

Image_ images_messages_61bd153ed8944f34de67c0ed_3f364fb255d74d77e659c514cf59b057_Screenshot20211217145124-35a957cd-cd1b-4d7c-82d5-dc31c19d0c0c-1721421114.png
Image_ images_messages_61bd153ed8944f34de67c0ed_b0c926ecba055799907d461752564771_Screenshot20211217145307-3fedd602-faf3-47f8-956d-17e3fce61d80-901491.png
1 ACCEPTED SOLUTION

vincent_felisaz
Contributor

Otherwise, you have to do a password recovery procedure:

 - connect to the console switch

 - boot up

 - stop the boot process at the begin by press 'b' key

 - enter 'no password' and 'boot'

 - the switch will start normally and you will have access to the CLI

 - change the password

 - and don't forget to do a 'write mem' 😉

Hope this will help

Vince

View solution in original post

4 REPLIES 4

vincent_felisaz
Contributor

Hi Shawn,

If the system has been reset, did you tried the default credentials super/sp-admin ?

Cheers

Vince

vincent_felisaz
Contributor

Otherwise, you have to do a password recovery procedure:

 - connect to the console switch

 - boot up

 - stop the boot process at the begin by press 'b' key

 - enter 'no password' and 'boot'

 - the switch will start normally and you will have access to the CLI

 - change the password

 - and don't forget to do a 'write mem' 😉

Hope this will help

Vince

@vincent_felisaz Thanks Vince, I tried "no password", unfortunately it still asked me to provide a username and password.

shawn_feng
New Contributor

It's done! I used Vince's method:
--type "no password"
-- "boot"
-- "ena"
-- "conf t"
-- "username admin password 123456789"
-- "aaa authentication web default local"
This adds the username and password.