cancel
Showing results for 
Search instead for 
Did you mean: 

CLI command to verify if I'm booted into the primary flash or secondary flash - Ruckus ICX 7450 ?

rahul_chakravar
New Contributor II

Hi all, I'm new to ruckus devices and trying to get my head around the CLI commands, etc.

Is there a CLI command to verify which partition I'm booted into?

1 ACCEPTED SOLUTION

BenBeck
Moderator
Moderator

Hey there,

"Show version" will tell you. Look for the verbiage "from primary" or "from secondary". You can use "show flash" to see what is stored in each flash partition.

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

2 REPLIES 2

BenBeck
Moderator
Moderator

Hey there,

"Show version" will tell you. Look for the verbiage "from primary" or "from secondary". You can use "show flash" to see what is stored in each flash partition.

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

mohammad_atmazi
New Contributor III
Try this command 
Image_ images_messages_61e7c67c3dc88b09f202d3fc_cd20e471f0ea5c4c912bbcce97ebb476_Capture-44793bbc-be8e-4d36-b5db-4d040cba48db-1829665601.PNG