RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

Inactivity Timeout set -Terminate idle user session in vSZ-H

I am having issue to keep Door Locks online all the time with multiple clients, the door lock weak-up every one hour to check the internet connectivity and once it miss the hard-beat send alarm message to the client over-all building so please can yo...

Can't associate R750 to SZ5.2 when R750 has static IP address.

HI.I recently heard that from partner we can't joining R750 with SZ5.2 when R750 has static IP address.Thus I tested that, and I got same result.Below is syslog on R750.<---------when R750 is configured static ip address -------------->Mar 12 01:46:3...

Very low 5Ghz band connections ?

Hello, I am seeing a small amount of users on our 802.11AC network connecting to very low 5Ghz channels e.g. 36 or 44. These users are seeing much slower connection results that the vast majority of users who connect to higher channels e.g. 108 and 1...

not showing online on a controller.(AP 310, 500

We have added Ruckus Devices on Controller, devices are working fine at a their locations but devices are not showing online on a controller. So Please take action as soon as possible & resolve the issue.

What does it mean on SZ 5.2?

Hi.When I associated R750 to SZ 5.2, it shows me below.AP Image Signing: AP [RuckusAP@xx:xx:xx:xx:xx:xx] with firmware version [112.1.0.0.2146] is USI. USI to FSI upgrade is not allowed due to difference in Image formats.What is this?

CommScope RUCKUS Community Forums

Forum Posts

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

Inactivity Timeout set -Terminate idle user session in vSZ-H

Can't associate R750 to SZ5.2 when R750 has static IP address.

Very low 5Ghz band connections ?

not showing online on a controller.(AP 310, 500

What does it mean on SZ 5.2?

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Top Contributor Contest

Related Self-Help

LBO

Status code: 500 "HV000028: Unexpected exception d...

Migrating Access Points from SZ100 to vSZ

R500 not joining Virtual Smart Zone

Ruckus ZD

Port Group for SZ-144 Controller

Change the controller name while it is part of Clu...

Change Port Default SSH Tunnel Port on Data and co...

Code 236 Event Client no show on my SZ300 V6

[sz(or vsz)] What settings should I change? Will t...